Stihl Chainsaw Guide Bars (Property Maintenance)

Genuine Stihl Chainsaw Guide Bars - for all domestic property maintenance models.

Stihl chainsaw guide bars are made from top quality chrome molybdenum steel. They're designed to be strong, yet lightweight and will keep your saw performing at its best. The sprocket at the end of the bar is maintenance free, unlike most competitors, where greasing is required.

Use the guide below to select the correct bar. If you're unsure of the size, it should be marked on the side of the bar (see picture). Alternatively, count the drive links (not the cutters). It's recommended to also replace the chain when you replace the guide bar, the old chain can be used at a later date.

Order at the bottom of the page.

Stihl GTA26 Garden Pruner

Cutter bar length 10cm/4" 1/4P 1.1mm 28 links       Use part number - 3007 003 0101

Stihl MS170, MS171 Chainsaws     

Cutter bar length 30cm/12" 3/8P 1.1mm 44 links      Use part number - 3005 000 3905

Cutter bar length 35cm/14" 3/8P 1.1mm 50 links      Use part number - 3005 000 3909

Stihl MS180, MS181, MS193, MS211, MS230, MS231 Chainsaws

Cutter bar length 30cm/12" 3/8P 1.3mm 44 links      Use part number - 3005 000 4805

Cutter bar length 35cm/14" 3/8P 1.3mm 50 links      Use part number - 3005 000 4809

Cutter bar length 40cm/16" 3/8P 1.3mm 55 links      Use part number - 3005 000 4813

Stihl MS250, MS251 Chainsaws

Cutter bar length 35cm/14" .325" 1.6mm 56 links      Use part number - 3005 000 4709

Cutter bar length 40cm/16" .325" 1.6mm 62 links      Use part number - 3005 000 4713

Cutter bar length 45cm/18" .325 1.6mm 68 links      Use part number - 3005 000 4717